SCR Power Amplifier EUPB110
Summary
Thanks for using EUPB0110. This product is mainly used to amplify the power when the load capacity of TRIAC knob or dimming device isn’t enough. For example, a brand dimmer C output 4 channel leading edge or trailing edge, and the maximum current is 1A/ch.If load current of one channel is larger than 1A, you need to increase the purchase of C or greater power product to meet the requirements, this will increase the cost a lot, you can choose the combination of C+EUPB0110 to amplify the power, which can significantly reduce the cost and facilitate clients to stock up.
Technical Parameters
| Model | EUPB0110 | |
|
Input |
Voltage | 100VAC-240VAC |
| Signal | 100-240VAC leading/trailing edge signal | |
| Channels of signal | 1 | |
| Output | Current/Voltage | 10A/ch/100-240VAC leading edge |
| Channel | 1
℃ ℃ |
|
|
Others |
Working Temp. | -20 ~50
℃ ℃, |
| Storage Temp.; Humidity | -40 ~85 20-90%RH | |
| N.W | 700g | |
| Dimension | 175*93.4*63.2mm(L*W*H), standard 35mm din rail | |
Dimension(mm)
Wiring Diagram
Note: Regardless of the input signal is the leading edge or the trailing edge, EUPB0110 output signal is the leading edge, please note the consistency of the other loop (if any) of the original dimmer.
※The contents of this manual are updated without prior notice. If the function of the product you are using is inconsistent with the instructions, the function of the product shall prevail.Please contact us if you have any questions.
