100-240VAC 10A*1ch SCR Power Amplifier EUPB0110

Short Description:

1. Receive leading/trailing edge signal of 100-240VAC

2. Single channel leading edge output, the maximum output current of 5A

3. Standard 35mm din rail, easy to install

4. Can be connected to incandescent lamp, halogen lamp, TRIAC dimming driver

5. Mainly used to enlarge the load capacity, when triac knob or phase cut dimming module used in lighting Control system don’t have enough capacity


Product Detail

Product Tags

100-240VAC 10A*1ch SCR Power Amplifier EUPB0110

Thanks for using EUPB0110. This product is mainly used to amplify the power when the load capacity of TRIAC knob or dimming device isn*t enough. For example, a brand dimmer C output 4 channel leading edge or trailing edge, and the maximum current is 1A/ch.If load current of one channel is larger than 1A, you need to increase the purchase of C or greater power product to meet the requirements, this will increase the cost a lot, you can choose the combination?of C+ EUPB0110 to amplify the power, which can significantly reduce the cost and?facilitate clients to stock?up.

Product Features

1. Receive leading/trailing edge signal of 100-240VAC

2. Single channel leading edge output, the maximum output current of 5A

3. Standard 35mm din rail, easy to install

4. Can be connected to incandescent lamp, halogen lamp, TRIAC dimming driver

5. Mainly used to enlarge the load capacity, when triac knob or phase cut dimming module used in lighting Control system don’t have enough capacity

Technical Parameter

Model EUPB0110
Output Channels 1
Voltage 100-240VAC leading edge
Current 10A/ch
Input Voltage 100-240VAC
Signal 100-240VAC leading/trailing edge signal
Channels of signal 1
Others Dimension 175*93.4*63.2mm(L*W*H)standard 35mm din rail
G.W 700g
Working temp. -20℃ ~50℃
Relative humidity 20~90% RH

  • Previous:
  • Next: